ELECTRODE WIRES
57100529, 57100530, 57100531, 57100532, 57100533, 57100534, 57100535, 57100894, 57100895, 57100896, 57103081
Description
Specification
*For inquiry, please advise 1,2,3:
1. Material
2. Hardness
3. Item No.
| MATERIAL | TYPE | TENSILE STRENGTH | NOTE |
|---|---|---|---|
| Brass C2700 (65/35) | Type E | 980~1080N/m2 | Most popular material for EDM high speed cutting. |
| Brass C2720 | Type B | 1000~1100N/m2 | Speed efficiency is 10~15% higher than C2700, suitable for Euro and Japanese EDM. |
| Brass C2800 | Type F | 1100~1200N/m2 | Speed efficiency is 20% higher than C2700. |
| HARDNESS | TENSILE STRENGTH | ELONGATION % |
CUTTING SELECTION | ||
|---|---|---|---|---|---|
| Kg/mm2 | Kg/mm2 | PSI | |||
| Hard | > 100 | > 980 | > 14,400 | < 2 | Surface straighten cutting |
| Medium hard | 60~70 | ~650 | ~9,400 | < 5 | Tape cutting under 10 degree |
| Soft | 45~60 | ~445 | ~6,400 | > 20 | Tape cutting between 7~30 degree |
UNIT: mm
| ITEM NO. | SPOOL TYPE |
SPOOL SHAPE |
WEIGHT OF WIRE COIL (kgs) |
DIAMETER OF WIRE |
D | d | L | h | LENGTH OF WIRE COIL (M) |
NUMBER OF COIL/BOX |
|---|---|---|---|---|---|---|---|---|---|---|
| 57100529 57100530 57100894 57100894-1 |
P-3R | 3 | 0.10 0.15 0.20 0.25 |
130 | 82 | 110 | 20 | 44500 19800 11100 7200 |
4 | |
| 57100895 57100533 57100896 57100896-1 |
K125 | 3.5 | 0.10 0.15 0.20 0.25 |
125 | 82 | 125 | 20 | 52000 23100 1300 8400 |
4 | |
| 57100531 57100531-1 57100531-2 |
P-5R | 5 | 0.20 0.25 0.30 |
160 | 90 | 114 | 20 | 18670 12000 8300 |
4 | |
| 57100534 57100534-1 57100534-2 |
K-160 | 6.5 | 0.20 0.25 0.30 |
160 | 100 | 160 | 22 | 24200 15600 10790 |
2 | |
| 57103081 57103081-1 57103081-2 |
P-10R | 10 | 0.20 0.25 0.30 |
200 | 90 | 134 | 25 | 37340 24000 16600 |
2 | |
| 57100535 57100535-1 57100535-2 |
K-200 | 15 | 0.20 0.25 0.30 |
200 | 120 | 200 | 22 | 56000 36000 16600 |
1 | |
| 57100532 57100532-1 57100532-2 |
P-15R | 20 | 0.20 0.25 0.30 |
250 | 110 | 140 | 34 | 74680 48000 33200 |
1 |
- This represents a DIN(Garman) standard coil,primarily desingned for AGIE and CHARMILLES machines.
- Zinc coated wire is suitable for cutting requrement with faster cutting speed and better finished surface result.