NC ROTARY TABLE & STRONG TAILSTOCK (YES VISE)
52172669
Specification
| ITEM NO. | UNIT | 52172066 | 52172066 | 52172068 | 52172069 | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Work table diameter | mm | ø125 | ø170 | ø210 | ø255 | |||||
| Center bore diameter | mm | ø30H7 | ø40H7 | ø40H7 | ø50H7 | |||||
| Through-hole diameter | mm | ø25 | ø40 | ø40 | ø50 | |||||
| Height of center (vertical) | mm | 160 | 190 | 225 | 225 | |||||
| Width of T-slot | mm | 12H7 | 12H7 | 12H7 | 12H7 | |||||
| Width of guide block | mm | 14 | 18 | 18 | 18 | |||||
| Servo motor type | Axis | Tilt | Axis | Tilt | Axis | Tilt | Axis | Tilt | ||
| Fanuc | α2i | α4i | α4i | α4i | α4i | α8i | α4i | α8i | ||
| Mitsubishi | HF75T | HF53T | HF53T | HF53T | HF53T | HF103T | HF53T | HF103T | ||
| Transmission ratio | 1:90 | 1:90 | 1:90 | 1:120 | 1:90 | 1:120 | 1:90 | 1:120 | ||
| Indexing resolution | deg. | 0.001 | 0.001 | 0.001 | 0.001 | |||||
| Tilting angle range | deg. | +40~-120 | +40~-120 | +30~-120 | +30~-120 | |||||
| Max. rotation speed | min-1 | 44.4 | 44.4 | 33.3 | 22.2 | 33.3 | 22.2 | 22.5 | 16.6 | |
| Max. load | In horizontal | kgs | 50 | 50 | 75 | 100 | ||||
| In tilt (0°-90°) | kgs | 35 | 35 | 50 | 75 | |||||
| Permissible cutting force | kgs-m | 8 | 17 | 25 | 40 | |||||
| Drive preassure / method | kgs/cm2 | 5/ Pneumatic | 5/ Pneumatic | 5/ Pneumatic | 50/ Hydraulic | |||||
| Brake torque | kgs-m | 8.5 | 18 | 18 | 26 | 26 | 30 | 70 | 70 | |
| Indexing accuracy | sec. | 40" | 60" | 20" | 60" | 20" | 50" | 15" | 50" | |
| Repeatability | sec. | 4" | 8" | 4" | 8" | 4" | 8" | 4" | 8" | |
| Net weight (w/o servo motor) | kgs | 100 | 170 | 260 | 340 | |||||